zesty
08-06-2007, 08:45 PM
There is another section in the dealer mode that is separate from the dealer channel menu.In this region the adjustable items will be 'DTMF' 7 dtmf codes can be edited. 'RX CH1' '12345678*' In this region you can re-edit the receive codes for selcall.If you have the radio set up for text acknowledgement this can be edited also.Obviously it will initially be set up in your clone application.
Do not confuse it with the receive codes in the dealer channel menu."TX CH 01" 1-32.You can edit 32 selcall transmit channel codes. "LIST O1" '123456789 10' This is the scan banks area. The scan banks can be re-configured in the dealer mode.Text can also be edited for the selcall tx channel codes in the dealer region.
"Emergency answer back call" The emergency answer back call channel can be re-assigned to any of the 160 channels."Priority channels" 'PRA PRB' You will be able to re-assign the priority channel .This will depend on how your scan is set up in the clone software.
"Power on comment" The power on welcome message can be re-edited in your dealer mode.
Do not confuse it with the receive codes in the dealer channel menu."TX CH 01" 1-32.You can edit 32 selcall transmit channel codes. "LIST O1" '123456789 10' This is the scan banks area. The scan banks can be re-configured in the dealer mode.Text can also be edited for the selcall tx channel codes in the dealer region.
"Emergency answer back call" The emergency answer back call channel can be re-assigned to any of the 160 channels."Priority channels" 'PRA PRB' You will be able to re-assign the priority channel .This will depend on how your scan is set up in the clone software.
"Power on comment" The power on welcome message can be re-edited in your dealer mode.