zesty
04-08-2006, 01:48 AM
Press the [PO] button and channel up key both together.While you have them both pushed in it is now advisable to press the power on button.The dealer status will be indicated on display.If thou does not have the CS-F300 clone program then the customary ICOM dealer default passcode of six digits will be entered.This six digit default passcode is "159357". [PO] = 0 & 5 [P1] = 1& 6 [P2] = 2& 7 [P3] = 3& 8 .
The down channel key will be clearly designated as such with a "Down Arrow". DOWN ARROW = 4 & 9. So henceforth your programmable assign button sequence for "159357" would be [P1] [PO] "Down Arrow" key [P3] [PO] [P2]-------PLEASE TAKE NOTE:Especially if you are new to the ICOM commercial scene.Do not confuse dealer password with your user password. User passcode is four digits.
The dealer passcode has to be "SIX DIGITS".I will anticipate that some of thee have CS-F300 clone program.In this scenario you do not need to enter the dealer default password.Enter clone software and re-edit dealer code to any six digit sequence. Selectable value:000000 to 999999.
The down channel key will be clearly designated as such with a "Down Arrow". DOWN ARROW = 4 & 9. So henceforth your programmable assign button sequence for "159357" would be [P1] [PO] "Down Arrow" key [P3] [PO] [P2]-------PLEASE TAKE NOTE:Especially if you are new to the ICOM commercial scene.Do not confuse dealer password with your user password. User passcode is four digits.
The dealer passcode has to be "SIX DIGITS".I will anticipate that some of thee have CS-F300 clone program.In this scenario you do not need to enter the dealer default password.Enter clone software and re-edit dealer code to any six digit sequence. Selectable value:000000 to 999999.