Tait TM8115

[dazzabear]

Hi all,
I have a TM8115, H6 that I'd like to program to 40 channel UHF but the program I have(TM8100 PA 2.72.00) won't let me program any more than 24 channels. Any help or advice would be appreciated.
Dazzabear..

[digiteyes]

Unsure why it will let you only go to channel 24 (it has a limit of 24 selcal codes).

Most likely a software/firmware incompatibility issue.

The current versions (SW/FW) are V3.06 and V2.15 repectively.

If you are upgrading firmware, you will also need to read & save the current radio calibration settings with calibration SW V4.05

[dazzabear]

Cheers Digiteyes,
Don't suppose you know where, or how I could get the SW & FW versions and the calibration SW?
I only have the TM8100 PA 3.02.

Cheers Dazzabear

[digiteyes]

Apart from Tait, I don't know.

Sorry, can't be of more help.