|
|
#2
05-13-2008, 11:12 PM
|
||||
|
||||
gme tx3800 program
Hi, I've obtained the programming software for TX3800 from the resources of this site under TX3600 - in addition I recommend the following in order to sucessfully install and run the programming software:
1) Download and install Virtual PC (free download from Microsoft site - http://www.microsoft.com/windows/pro...c/default.mspx) Note: (i) it is preferred to use a PC with a serial port and not via a USB-Serial adapter. I tried for ages but was unsuccessful to map to the designated serial port via the USB-Serial adapter (ii) the host computer must run the following host operating systems to install Virtual PC: Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate, Windows Server 2003 Standard Edition, Windows Server 2003 Standard x64 Edition, Windows XP Professional, or Windows XP Tablet PC Edition 2) Install Win95 or Win98 as the guest operating system within the Virtual PC shell (I only tried Win98  . You would need the full installation software3) Map the programming Com port number to the respective Com port number associated with the guest operating system as specified in the Virtual PC setup 4) Connect the programming cable from the radio microphone jack to the PC's serial input... and... PRESTO Good luck... Last edited by RiverinaWaterBoy : 05-24-2008 at 10:12 AM. 
|
|
#3
05-14-2008, 04:14 PM
|
||||
|
||||
xp pro
Quote:
|
|
#4
05-15-2008, 08:07 PM
|
||||
|
||||
|
Hi Dale, I have GME TX3600 PMR Version DS0019.1.00. I recently downloaded this version from the resources area of UFHWorld. What version did you successfully install on XP Pro?
Does anyone else know whether there is a more recent version available that might be compatible with XP Pro?
|
|
#5
05-16-2008, 06:36 PM
|
||||
|
||||
|
Quote:
Last edited by Dale : 05-16-2008 at 06:41 PM.
|
|
#6
05-20-2008, 08:13 PM
|
||||
|
||||
|
G'day Dale, is it worth upgrading to at least DS19.1.05 in terms of the software functionality, other than able to run the software on XP?... Does it have any newer features, tricks, bells and whistles etc that are worth pursuing?
Regards, Jas
|
|
#7
05-21-2008, 06:36 PM
|
||||
|
||||
|
Quote:
Last edited by Dale : 05-21-2008 at 06:41 PM.
|
|
#9
05-23-2008, 01:35 PM
|
||||
|
||||
|
Well, I have learnt alot regarding the installation and differences of the GME software versions thanks to Dale.
Basically I think everyone's personal experiences are going to be different depending on: Windows operating System, availability of physical serial Com ports, USB-Serial Com Port Adapters, version of PMR software. I have compiled a pdf document highlighting major differences between PMR DS19.1.09 and DS19.1.05 versions of software. This document outlines the obvious differences between the software versions but is limited to my understanding of both software and radio features and capability. I will gladly email this document to anyone who's interested, or I'm wondering whether the ufhworld webmaster would like receive this document and modify it accordingly, and then post it onto the resources area???? Based on my experiences, I have found that: 1) DS19.1.00 will not run on XP (ie. it froze) but no problems on WIN98 (SE)... Maybe refer to my previous posting regarding Virtual PC to run it within XP 2) DS19.1.05 and DS19.1.09 will run on XP. I had difficulties establishing Coms with DS19.1.05 via a USB-Serial adapter though the actual program did work. After discussions with Dale it seems that he has no problems running this version on XP including the Coms. However DS19.1.09 worked like a treat for me using a USB-Serial adapter on XP. 3) it may be a trial and error process using a USB-Serial Coms Adapter if you don't have a physical serial port. Cheers Thanks again Dale for your assistance...  Last edited by RiverinaWaterBoy : 05-24-2008 at 10:11 AM.
|
|
#10
06-17-2008, 03:35 PM
|
||||
|
||||
|
Programming TX3800
I have been reading your posts between (Dale and RiverinaWaterBoy)and found them very informative so, thank you.
I had the same trouble with programming my TX3800 under XP. I used Virtual PC with Win98 as guest, and after alot of messing around finally got the old DS1900.1.00 to work!!! Since then I have aquired DS1900.109 works perfectly on Win2000, NT and XP. Cheers and Thanks again.tx3600 & tx3800 ds0019.1.09 mjd.jpg
|
 |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| GME tx7200 and tx3800 programming and software. | sirsmiles | GME | 2 | 01-09-2011 10:44 PM |
| How do I program my TX3200 | hrt | GME | 2 | 06-25-2007 08:03 AM |
| gme tx3800 | ray9491 | General Chat | 1 | 04-05-2007 09:24 PM |
| Need Tx 3600 program | clevelandv8 | GME | 1 | 02-10-2007 08:26 AM |
| TX3800 need software | gunzal | GME | 0 | 05-04-2006 12:18 PM |
Linear Mode
